Elta Mori 100HR Single Room Heat Recovery *4 inch model*
The Elta Mori 100HR is a heat recovery unit, designed to ensure adequate ventilation in enclosed environments without energy losses. efficient reversible EC motor with integral thermal protection, mounted on sealed for life high quality ball bearings.
Designed for continuous running. Regenerative heat exchanger with ceramic core; high thermal efficiency (up to 90%).
Alternate flow with flow reversal approx. every 70 seconds.
It is recommended that two units are installed in pair: when one unit is pulling, the other is pushing. Pair of units can be installed in the same room or in different rooms (i.e. living room and bedroom). The unit is suitable for installation on an outside wall.
The unit should operate continuously, and only stopped for maintenance or service. When heat exchange is not useful (for example in midseason - when indoor and outdoor temperatures are similar), or when heat exchange is not recommended (for example with the option “summer free cooling”), or it is requested to increase the acoustic comfort, or in case of extreme weather conditions (for example with strong wind or exceptionally rigid temperatures), it is recommended to set the unit in extract only mode (eventually at minimum speed) and NOT to switch it off.
We Also Recommend