Menu
Cart 0
Vectaire Elegance EL1003 4" (100mm) Continuous Extract Fan

Vectaire Elegance EL1003 4" (100mm) Continuous Extract Fan

  • £95.00


  • energy efficient EC motor - lowest energy consumption in the UK
  • provides low level continuous ventilation to control condensation
  • 3 speed axial fan
  • choice of 2 low speeds at installation
  • wall, ceiling or window (with additional window kit)
  • for any domestic wet room
  • low noise levels and running costs
  • Sfp down to .09 w/l/s
  • compliant with Building Regulations Parts L1 2013 and F 2013

General

  • SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan
  • to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m)
  • suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens
  • runs continuously at pre-selectable choice of two lower speeds (fixed at installation)
  • Speed 1 operates at 9.5 l/s (factory set)
  • Speed 2 operates at 13.8 l/s
  • with anti-vibration gasket
  • all models incorporate cord which can be removed to allow other types of switching
  • speed boosted to maximum (28.5 l/s) using integral pull cord or by:
    • remote switch/light switch
    • PIR sensor
    • DRH240 (dynamic remote humidistat)
  • the design of the EL1003 allows intake of air around the whole perimeter
  • patented anti-turbulence deflectors ensure very low noise levels and optimum performance
  • energy saving ventilation
  • extremely low running costs
  • low carbon footprint
  • 2 year warranty

Specification

  • shockproof, high quality technopolymer casing
  • designed using latest wind tunnel technology and CFD simulations
  • EC induction motor with thermal protection
  • 30,000 hour life motors with maintenance free and long life ball bearings
  • operates in ambient temperatures up to 40OC
  • double insulated - no earth required
  • IPX4 - Splashproof rated - can safely be installed in Zones I and II

Compliance

  • Part L1 2013 of Building Regulations for enhanced energy saving capability
  • Part F 2013 of Building Regulations for reliable, efficient ventilation
  • IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electro-magnetic compatibility
  • CE marked
  • SAP Q eligible
  • Energy Saving Trust Best Practice Compliant

We Also Recommend