Vectaire Elegance EL1003DT 4" (100mm) Continuous Extract Fan with Comfort Timer & Vectaire 100mm - 150mm DMEV White Cowl **BUNDLE**
- energy efficient EC motor - lowest energy consumption in the UK
- provides low level continuous ventilation to control condensation
- 3 speed axial fan
- choice of 2 low speeds at installation
- wall, ceiling or window (with additional window kit)
- for any domestic wet room
- low noise levels and running costs
- Sfp down to .09 w/l/s
- compliant with Building Regulations Parts L1 2013 and F 2013
General
- SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan
- to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m)
- suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens
- runs continuously at pre-selectable choice of two lower speeds (fixed at installation)
- Speed 1 operates at 9.5 l/s (factory set)
- Speed 2 operates at 13.8 l/s
- with anti-vibration gasket
- all models incorporate cord which can be removed to allow other types of switching
- speed boosted to maximum (28.5 l/s) using integral pull cord or by:
- remote switch/light switch
- PIR sensor
- DRH240 (dynamic remote humidistat)
- the design of the EL1003 allows intake of air around the whole perimeter
- patented anti-turbulence deflectors ensure very low noise levels and optimum performance
- energy saving ventilation
- extremely low running costs
- low carbon footprint
- 5 years manufacturers warranty, 1 year parts and labour the remaining 4 years parts only
- EL1003DT - 3 speed, continuous running with comfort timer (timer does not activate unless fan has been running for 2 minutes to avoid unnecessary night-time operation) and pull-cord
Specification
- shockproof, high quality technopolymer casing
- designed using latest wind tunnel technology and CFD simulations
- EC induction motor with thermal protection
- 30,000 hour life motors with maintenance free and long life ball bearings
- operates in ambient temperatures up to 40OC
- double insulated - no earth required
- IPX4 - Splashproof rated - can safely be installed in Zones I and II
Compliance
- Part L1 2013 of Building Regulations for enhanced energy saving capability
- Part F 2013 of Building Regulations for reliable, efficient ventilation
- IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electro-magnetic compatibility
- CE marked
- SAP Q eligible
- Energy Saving Trust Best Practice Compliant
The Vectaire VWC-W is a 4-6inch wall cowl in white, designed to reduce the negative impact that back draughts can have on fan extraction rates and flame retardant.
Cowl Size - 230mm x 210mm x 60mm
We Also Recommend